French Italian Dutch Spanish Danish German Russian Japanese Korean Simplified Chinese    HOME      COMPANY     PRODUCTS     CATEGORY LIST     WHAT'S NEW!     INFO CENTER     CONTACT US
PRODUCTS
 
   Emergency and Clinics
  Accessories
  Cables/Holter/Electrodes
  ECG Machine
  ECG Series
  Electrosurgical unit
  Fetal Doppler
  Fetal Monitor
  OEM Modules
  Patient Monitor
  Phantoms / Tool Kit
  Pulse Oximeter
  SpO2 Sensors solution
  Testing Measuring Equipme
Category Descriptions

BEST SELLERS
Low Flow SIDESTREAM End-Tidal CO2 (ETCO2) MODULE Model C300M compatible with Respironics Loflo CO2 sensor
Item No.: MONM-C300M
$0.00
OEM ETCO2 MODULE (End-tidal CO2) CO2 Module Model C200 for measuring Respiratory Carbon Dioxide CO2 Sensor
Item No.: MONM-C200
AccuPulse HandHeld NIBP Simulator
Item No.: NSCD-APHS
$0.00
Low Flow SIDESTREAM End-Tidal CO2 (ETCO2) MODULE Model C300 compatible with Respironics Loflo CO2 sensor
Item No.: MONM-C300
 

Item Details   ITEM DETAILS  

MAMMOGRAPHIC ACCREDITATION PHANTOM MODEL 015

Meets MQSA requirements. The Mammographic Accreditation Phantom was designed to test the performance of a mammographic system by a quantitative evaluation of the systemí»s ability to image small structures similar to those found clinically. Objects within the phantom simulate calcifications, fibrous calcifications in ducts, and tumor masses.
MAMMOGRAPHIC ACCREDITATION PHANTOM MODEL 015
Model Number: Model 015
GOLDWEI Item No.: MMCS-015
 

Mammographic
Accreditation Phantom

The required standard for
image quality evaluations


Model 015




Meets MQSA requirements. The Mammographic Accreditation Phantom was designed to test the performance of a mammographic system by a quantitative evaluation of the systemí»s ability to image small structures similar to those found clinically. Objects within the phantom simulate calcifications, fibrous calcifications in ducts, and tumor masses.

The Phantom is designed to determine if your mammographic system can detect small structures that are important in the early detection of breast cancer. Test objects within the phantom range in size from those that should be visible on any system to objects that will be difficult to see even on the best mammographic systems.

The 4.4 cm thick Mammograhpic Phantom is made of a 7 mm wax block insert containing 16 sets of test objects, a 3.4 cm (approx. 1-3/8") thick acrylic base, and a 3 mm (1/8") thick cover. All of this together approximates a 4.2 cm compressed breast of average glandular /adipose composition. Included in the wax insert are aluminum oxide (Al2O3) specks to simulate micro-calcifications. Six different size nylon fibers simulate fibrous structures and five different size lens shaped masses simulate tumors.

Phantom includes a 4 mm acrylic step wedge, operating instructions, faxitron x-ray image and magnifying lens.

Phantom
Wax Insert

FIBERS
1. 1.56 mm nylon fiber
2. 1.12 mm nylon fiber
3. 0.89 mm nylon fiber
4. 0.75 mm nylon fiber
5. 0.54 mm nylon fiber
6. 0.40 mm nylon fiber


MASSES
12. 2.00 mm (thickness) mass
13. 1.00 mm (thickness) mass
14. 0.75 mm (thickness) mass
15. 0.50 mm (thickness) mass
16. 0.25 mm (thickness) mass

SPECKS
7. 0.54 mm AI2O3 speck
8. 0.40 mm AI2O3 speck
9. 0.32 mm AI2O3 speck
10. 0.24 mm AI2O3 speck
11. 0.16 mm AI2O3 speck

Phantom
Body
MATERIAL: acrylic
LENGTH: 10.8 cm
WIDTH: 10.15 cm
DEPTH: 4.4 cm

Mammographic Accreditation Phantom The required standard for image quality evaluations Model 015 Meets MQSA requirements. The Mammographic Accreditation Phantom was designed to test the performance of a mammographic system by a quantitative evaluation of the systemí»s ability to image small structures similar to those found clinically. Objects within the phantom simulate calcifications, fibrous calcifications in ducts, and tumor masses. The Phantom is designed to determine if your mammographic system can detect small structures that are important in the early detection of breast cancer. Test objects within the phantom range in size from those that should be visible on any system to objects that will be difficult to see even on the best mammographic systems. The 4.4 cm thick Mammograhpic Phantom is made of a 7 mm wax block insert containing 16 sets of test objects, a 3.4 cm (approx. 1-3/8") thick acrylic base, and a 3 mm (1/8") thick cover. All of this together approximates a 4.2 cm compressed breast of average glandular /adipose composition. Included in the wax insert are aluminum oxide (Al2O3) specks to simulate micro-calcifications. Six different size nylon fibers simulate fibrous structures and five different size lens shaped masses simulate tumors. Phantom includes a 4 mm acrylic step wedge, operating instructions, faxitron x-ray image and magnifying lens.

There are no documents download yet.

About Us | Latest News | Products| Category List | Terms & Warranty | Manufacturers | Knowledge Base | FAQ | Contact Us |JJWEI Computers | GoldWEI Superfood |
© 2003-2011, GoldWEI Corporation, All Rights Reserved.  Phone: 703-713-0198  Email: sales#goldwei.com