|
|
 |
FEATURED ITEMS |
 |
|
|
| Model 170NJ
|
|
|
The Model 170NJ phantom provides a simple and reproducible test tool for interfacility surveys and intra-department
comparison of radiographic systems. For routine quality control, the phantom images provide a rapid assessment of high
contrast resolution, low contrast detectability, radiographic exposure consistency as well as radiation light-field alignment
and collimation accuracy.
Click for More Details
|
|
|
|
| Electron Density Phantom Model 062
|
|
|
To improve the accuracy of your treatment planning consider the Model 062 Electron Density Phantom. The Model 062 enables precise correlation of CT data in Hounsfield units to electron density and includes eight different tissue references. A syringe insert which can be filled with any fluid or solid material is included. An optional titanium reference is also available.
Click for More Details
|
|
|
|
|
| Model 164A Stereotactic Breast Biopsy Phantom
|
|
|
The phantom provides a good representation of breast tissue, thereby making it close to a real-life learning experience.
The automated stereotactic breast biopsy procedure depends on several variables for accurate needle placement. Use of
the Model 164A provides technologists and physicians with the training needed to be confident in performing stereotactic
procedures.
Click for More Details
|
|
|
|
|
| OEM ETCO2 MODULE (End-tidal CO2) CO2 Module Model C200 for measuring Respiratory Carbon Dioxide CO2 Sensor
|
|
|
ETCO2 Module, or end-tidal CO2, or End tidal Carbon Dioxide Module, ETCO2 Module is an OEM module used in Patient Monitors, Ventilators or Anesthesia Machine to monitor the breath status (ETCO2, CO2 waveform, Real-time CO2, Inspired CO2, Respiratory Rate) by measuring exhalant gas from people. It is useful in the ICU, surgery, anesthesia ward, emergency clinic, etc.
The ETCO2 module Model C200 is the best cost effective product in the worldwide market which helps the patient monitor manufacturers to cut the cost to quite a large extend while achieving the same or better performance and functions as the other ETCO2 modules. The ETCO2 module is a complete data collection and analysis system for monitoring respiratory carbon dioxide concentration. The Model C200 module includes a miniature CO2 sensor, barometric pressure transducer, sampling flow control and a miniature low-power vacuum pump. A microprocessor collects the sensor data and calculates various real-time parameters: instantaneous CO2 concentration, respiration rate, end-tidal CO2, inspired CO2, inspiration and expiration times. Our sidestream ETCO2 module Model NM-C300 is newly released, you can take a look at it here
Click for More Details
|
|
|
 |
|
|
| Model 461A Head/Body CT Phantom
|
|
|
The Model 461A Head/Body CT Phantom provides a set of tools for evaluating CT image quality. The main modules are constructed of Solid Water? This permits testing without the difficulties of filling phantoms with water. The set of standard inserts is sufficient for many users. The Gammex 461A comes complete with a custom carrying case.
Click for More Details
|
|
|
|
|
| Forearm Phantoms Model 604
|
|
|
The Forearm phantoms are available in three standard mineral densities of 400, 600 and 800 mg/cc calcium hydroxyapatite equivalence and are sold as a set. The simulated radius and ulna are embedded in a muscle equivalent epoxy matrix.
Click for More Details
|
|
|
|
|
| 3 Dimensional Torso Phantom Model 602
|
|
|
The Anthropomorphic Torso Phantom is designed to provide an accurate simulation of an average male torso for medical imaging applications. The removable organs enable flexibility in the placement of TLDĄ¯s, contrast agents, etc.. The epoxy materials used to fabricate the phantom provide optimal tissue simulation in the diagnostic energy range (40 keV to 20 MeV).
Click for More Details
|
|
|
|
|
|
Emergency and Clinics
Auto Diagnostic Cable
