What is needed is installing an 8-pin LEMO socket on the host panel, power is supplied to the module via a cable, the measurement data will be read from the module, thus assembly of the module and the host is completed. Detailed communication protocol will be provided together with the sidestream ETCO2 module, monitors manufacturers simply complete the corresponding the display according to the provided communication protocol, everything will become so easy. Even more pleasing is, the communication protocol of our CO2 module is compatible with the Sidestream LoFlo CO2 module by Respironics, which means existing Respironics sidestream CO2 module users do not need to change even a program code, simply plug in our CO2 module and it will work perfectly and you are making the switch seamlessly.
The Low-flow design (low sampling rate) better matches the performance of the water line, and gets rid of the trouble of installing the water trap and its bracket on the monitor; it also reduces environmental pollution caused by exhaust gases, and is good to monitoring newborns with less exhaled gas and other occasions.
With the continuous progress achieved in medical industry, doctors and patients both have become increasingly demanding on configuration parameters provided by the monitors, end-tidal CO2, which is on high-end side, is gradually becoming a standard parameter for patient monitors. So, the problem facing now, is how will the monitor manufacturers deal with the ever-intensifying competition? How to maintain reasonable profit margin while the prices are coming down more and more? Our LowFlow sidestream ETCO2 module Model C300 will be your best choice to make high-end parameters monitors with low-end cost. We will satisfy your needs with our long expected ETCO2 module Model C300! Contact us now to get the world's most cost-effective CO2 module and become the leader in the world monitors market.
Below is a list of monitor brands, some of their models use the plug & play CO2 module of Respironics Loflo, for those monitors, you can use our ETCO2 module C300 directly without any problem, you don't even have to change anything on the software. Except for replacing the sidestream module of Respironics, our Module C300 will also be able to replace the mainstream module of resprionics except that our module will still in a sidestream way.
If you want to order the CO2 modules for monitors of any of the following brands, while placing an order, please let us know the brand and model of your monitors so we can make the specific CO2 module with the exact connector and firmware!
AirSep, Inc. U.S.A.
BioMed Devices U.S.A.
Dixtal Biomedica Ind. Com. LTDA.Brazil
Draeger Medical USA
Fukuda Denshi Japan
GE Medical Systems Information Technology U.S.A.
Ingmar Medical, Ltd.U.S.A.
Integrated Medical U.S.A.
Larson & Toubro India
Maquet Sweden
Medical Systems Ltd. Russia
Philips Medical U.S.A.
P.P.P. EmtelPoland
Sartorius AGGermany
Sharn Veterinary U.S.A
Spacelabs MedicalU.S.A.
TaemaFrance
Vetronics U.S.A.
Vetspecs U.S.A.
Witt BioMedical U.S.A.
ZOLL Medical Corporation U.S.A.
| Transducer Type
|
Sidestream CO2 Sensor |
| Sample Rate
|
50 ML/min. ±10 ML/min. |
| Principle of Operation
|
Non-dispersive infrared (NDIR) single beam optics, dual wavelength, no moving parts |
| Initialization Time
|
Capnogram displayed in less than 10 seconds, at an ambient temperature of 25°C, full specifications within 1 minute |
| CO2 Measurement Range
|
0 to 150 mm Hg, 0 to 19.7%, 0 to 20 kPa (at 760 mm Hg). Barometric Pressure supplied by module itself |
| CO2 Resolution
|
0.1 mm Hg 0 to 49 mm Hg
0.2 mm Hg 50 to 150 mm Hg |
| CO2 Accuracy
|
0 – 40 mm Hg ±2 mm Hg
41 – 70 mm Hg ±5% of reading
71 – 100 mm Hg ±8% of reading
101 – 150 mm Hg ±10% of reading
Above 80 BPM ±12% of reading
|
| CO2 Stability
|
Drift over any hours shall not exceed 0.5 mm Hg max. |
| CO2 Noise
|
RMS noise of the sensor shall be less than or equal to 0.25 mm Hg at 5% CO2 |
| Respiratory Rate Range
|
2 to 150 Breaths Per Minute (BPM) |
| Respiratory Rate Accuracy
|
±1 breath |
| Compensations
|
Barometric Pressure 400 mm Hg to 800 mm Hg can be compensated by module automatically |
| Calibration
|
No routine user calibration required, but module can be calibrated by user |
| Sample line
|
Single patient use sample line and inline drier line which eliminates water vapor of gas |
| Nasal Sampling Kits for Non-intubated Patients
|
Adult, pediatric and infant nasal CO2 sampling |
| On-Airway Adapter KITS for Intubated Patients
|
Adult, pediatric and infant sampling line with T-fitting |
| Sample Kit Hours of Use
|
Nasal Cannula and connecting sampling line ?up to 12 hours, for single patient
T-fitting (on-Airway Adapter) ?can be disinfected repeatly
Drier sampling line ?up to 120 hours |
| Flow Control
|
Via Delta P measurement across a capillary tube |
| Scavenging Port
|
Yes |
| Voltage Requirements
|
5.0 VDC ±5% |
| Power Rating
|
Rated input: Less than 0.5 Watts typical. Steady State Less than 1.1 Watts maximum on Offset Calibration or sampling line occluded. |
| Interconnection
|
Standard Lemo Redel 8-pin plastic
Material PSU
Sensor Plug: PAB.M0.8GL.AC39GZ
Band Relief: GMA.1B.030.DJ
Host Receptacle: PKB.M0.8GL.LJ
Note: Pin out:
1 VA 5.0V
2 Shield Shield
3 DGND Digital return
4 VA 5.0V
5 TxD Serial data from the Module
6 RxD Serial data from Host
7 AGND Analog return
8 NC |
| Temperature and Humidity
|
Operating:0º to 50ºC, 10 to 90% RH, non-condensing
Storage: -40º to 60ºC, <90% RH, non-condensing |
| Water Resistance
|
IPX4 ?Splash-proof (When sample line is inserted in gas-in connector) |
| Shock Impact
|
IEC TR 60721-4-7 Class 7M3 (designed to withstand environments subject to significant vibrations or high shock levels)
EN60068-2-27 Shock
EN60068-2-64 Random vibration |
| Data Interface
|
RS232, bi-directional, 19200 baud. Standard N-8-1. |
| Data Output
|
CO2 gas concentration (mm Hg), End-tidal CO2, Inspired CO2, Respiratory Rate Gas and barometric pressure. |
| Regulatory
|
Designed to meet IEC 60601-1-2, EN55011 ?CISPIR 11 Class B (Radiated and Conductive Emissions),
IEC 61000-4-2 Electrostatic Discharge Immunity, IEC 61000-4-3 Radiated Immunity, Designed to comply
with 93/42/EEC (MDD CE Marking), FDA Standards, Minimum Performance and Safety Requirements for
Capnometers and ISO21647. Medical Electrical Equipment performance requirements for the basic safety
and essential performance of respiratory gas monitors. |
Emergency and Clinics
Auto Diagnostic Cable
)
